I have a 1971 P35, Center board. She's listing a good 4inches to the port. What could this be? The bilge is dry.
This Spring I fixed a crack that was leaking water on the starboard side, to the rear of the centerboard housing, just in front of the deepest part of my bilge in that flat area. I opened the crack to properly repair the issue and found a fairly large cavity full of water. I pumped it out. noted there was no water in it for a few days after and sealed the crack and now hole. I pumped a lot of water out of this mysterious place. I am thinking it came from years and years of the starboard hull soaking up water from who knows where... which had a limit and now that ive pumped the starboard side out the port side must have the same issue. This is all i can think of.
Does anyone have a suggestion or similar story with hopefully a good fix? george@campbellrepresentation.com. Thanks!
Thanks
GC
