Pearson Yachts Forum

Pearson Boats - Common Systems => Ports & Hatches => Topic started by: Derrick on November 08, 2017, 10:37:28 AM

Title: What Are the port sizes
Post by: Derrick on November 08, 2017, 10:37:28 AM

What Are the port sizes for ports in head and v berth areas. 410 or 414
Thanks

Title: Re: What Are the port sizes
Post by: selene on November 08, 2017, 12:35:25 PM

I measured mine (#212) as 414s.

Title: Re: What Are the port sizes
Post by: rnebergall on November 08, 2017, 02:07:06 PM

Mine (Zufrieden #344) are also 414. 

Title: Re: What Are the port sizes
Post by: Derrick on November 10, 2017, 08:37:56 AM

thanks.

Title: Re: What Are the port sizes
Post by: Chance on November 10, 2017, 10:15:46 AM

On Chance Hull 10 replace all four in 2015 .  Bought  414 in size ,all opening are now  install with screens great cross ventilation. I purchase them from Fisheries Supply .  I also used the one with the closing knobs for a better seal .  They  were Beckson  P.O. BS-2-1 with the knobs .  The Cams were 414-BS-10 . Used pearson site for information on install very help full.  On voids between the  inside liner and outside truck cabin, put rod foam to keep  West  epoxy  from running out . You must thicken the epoxy also  to do sides and top, use spacer and clamps as pearson  site shows.
Bob K